TECNOCOAT MEMBRANES

TECNOCOAT are waterproof membranes of the highest quality that are formed from the application at high temperature and pressure of its liquid components. Its excellent properties make it one of the most used membranes in works with high technical requirements.

ADVANTAGES

Completely watertight. 100% waterproof

ETA / BBA certified for 25 years

Fast dry (Just 5 seconds)

No joints and overlap

Fully adhered

Can be applied even with zero slope

Suitable to pedestrian traffic

Apt for road traffic

Adapts to any shape or geometry

Excellent adhesion to all surfaces

Weather resistant

Extremely resistant to high temperatures


APPLICATION

1. PREPARATION

1. The substrate must be in good condition, dry, firm and clean of dust or any previous waterproofing.
2. Repair any irregularities (cracks, fissures, cracks, cracks, tiles in bad condition, etc.).
3. Treat the singular elements (downspouts, joints, meetings with vertical walls, etc.) as described in the technical data sheet.


2. PRIMER

Apply, by roller and in two or more coats, the primer recommended according to the type of surface (see technical data sheet).


3. TECNOCOAT MEMBRANE

Tecnocoat is applied by means of TC2049 or similar dosing equipment. The most common application parameters are:
● Isocyanate heater temperature: 70-75 ºC.
● Amine heater temperature:70-75ºC
● Hose temperature: ±70 ºC
● Working pressure: 2,500-3,000 psi


4. PROTECTION LAYER

If the system is exposed to UV rays, the use of TECNOTOP 2C is recommended as a protective and decorative finish coat.

SYSTEMS

NEW BUILD FLAT ROOF
1. Surface preparation | 2. Primer
3. TECNOCOAT membrane
4. Finish with TECNOTOP 2C / TECNOTOP S-3000
FLOORING SUBJECT TO HEAVY VECHICLE TRAFFIC
1. Surface preparation | 2. Primer
3. TECNOCOAT P-2049 membrane |
4. Finish with TECNOTOP 2C + TECNOPLASTIC C or TECNOTOP S-3000 + TECNOPLASTIC C
SURFACE RENOVATION
1. Surface preparation | 2. Primer
3. TECNOCOAT P-2049 membrane
4. Finish with TECNOTOP 2C or TECNOTOP 2C + TECNOPLASTIC F or TECNOTOP S-3000 + TECNOPLASTIC C
CERAMIC FINISH
1. Surface preparation | 2. Primer
3. TECNOCOAT P-2049 membrane
4. PRIMER | 5. Ceramic finish fixed with mortar
GREEN ROOF
1. Surface preparation
2. Primer| 3. TECNOCOAT P-2049 membrane
4. Selected garden area finisdh
TECNOPOL INVERTED ROOF
1. Surface preparation
2. TECNOFOAM spray foam | 3. TECNOCOAT P-2049
4. TECNOTOP 2C protection
TRADITIONAL INVERTED ROOF
1. Surface preparation | 2. Primer
3. TECNOCOAT P-2049 membrane
4. Polyurethane sheet | 5. Gravel finsih
PLOT PAVING
1. Surface preparation
2. Primer | 3. TECNOCOAT P-2049 membrane
4. Plot paving finish
CONSTRUCTION & RENOVATION OF SWIMMING POOLS
1. Surface preparation
2. Primer | 3. TECNOCOAT P-2049 membrane
4. TECNOTOP 2CP or ceramic finish

SPECIFICATIONS

PROPERTY

VALUE

Density ISO 1675

 ±1,10 ±0,05 g/cm³
Initial drying time ±5 seconds
Recoating range 10 seconds ~ 48 hours
Service temperature range -20 ºC ~ 90 ºC
Pedestrian / vehicular trafficability ±3 hours / ±12 hours
Elongation at break ISO 527-3 >350%
Tensile strength ISO 527-3 >20 MPa a 10 days
Shore hardness A DIN  53.505 >93
Shore hardness Shore D DIN 53.505 >50
Service life of the system W3: 25 years at 1.4 mm thickness
Climatic zone S (severe)
Resistance to water vapour diffusion EN 1931 µ=2.279
Water vapor transmission ISO 7783 14 g/ (sqm/day)
Temperatures / Usage load P4:TH4, for all substrates in W2

P4:TH4, for concrete/steel/OSB in W3
Slope of building element S1~S4, applicable on zero slope
External fire performance
EN 13501-5:2005
According to CTE DB-SI2		 Broof classification (t1)+(t2)+(t3)+(t4)
Reaction to fire Euroclass E
Resistance to fatigue movement EOTA TR-008  suitable in 1,000 cycles
VOC (Volatile Organic Compounds 0
Solids content ISO 124:2014 100%
Anti-rooting certificate EN 13948:2008 YES
Adhesion to the substrate (concrete) > 2 MPa
General chemical resistance Resistant to various chemical products and elements
(consult technical department)
Temperature range of use (service)

Consistent performance :-40 ºC ~ +140 ºC